Showing 1–9 of 152 results

ACK A-30.5Out of stock

ACK A-30.5

Altitude Encoder, 30000 feet/100 feet

The ACK A30 is the smallest, lightest, highest quality, most cost-effective Mode C and Mode S altitude encoder available. High reliability solid state electronics. Quick, easy installation – generally less than one hour. Reports altitude to 30,750 ft.

ACK A-30.9Out of stock

ACK A-30.9

Altitude Encoder, 42000 feet/10 feet

The ACK A30 is the smallest, lightest, highest quality, most cost-effective Mode C and Mode S altitude encoder available. High reliability solid state electronics. Quick, easy installation – generally less than one hour. Reports altitude to 42,000 ft. For use with the latest GPS & Terrain Awareness Systems (TAWS).

Artex ELT 1000Out of stock

Artex ELT 1000

ELT, 406 MHz, w/ Install Kit, Remote Sw

The ELT 1000 is equipped with NAV interface, so if you run into an emergency, search and rescue teams will be given your aircraft location in less than a minute, within 100 meters. In addition to providing position accuracy, the ELT 1000 transmits on 406 MHz and 121.5 MHz frequencies. Like all our products, this ELT is built to surpass industry standards, and ensure that you’ll always get the help you need. Be Prepared for the Unpredictable: – Single output – Two-wire remote switch – Built-in GPS navigational interface – Accurate positioning – Multiple installation configurations.

Artex ME406Out of stock

Artex ME406

ELT, 406 MHz

The ARTEX ME406, a single output ELT, utilizes the same RF output and only one coax cable to transmit a 406 MHz emergency signal to the Cospas/Sarsat satellites and a local 121.5 Homing signal. The ELT automatically activates during a crash and transmits a continuous swept tone of 121.5 MHz. During activation, the 406 MHz transmitter sends an encoded 5-watt signal to the Cospas-Sarsat Satellites every 50 seconds for 440 milliseconds to alert Search and Rescue.

Artex ME406POut of stock

Artex ME406P

Portable ELT, 406 MHz, w/ Install Kit, Portable Antenna

As a single-output Emergency Locator Transmitter, the Artex ME406P utilizes the same RF output to transmit 121.5 and 406 MHz emergency signals to the Cospas/Sarsat satellites. The ELT automatically activates during a crash and transmits a continuous swept tone of 121.5 MHz. During activation, the 406 MHz transmitter sends an encoded 5-watt signal every 50 seconds for 440 milliseconds to alert Search and Rescue.

Out of stock

AvMap EKP V

Portable GPS

AvMap presents EKP V the next step in the evolution of aeronautical GPS, redefining the role of the GPS inside the cockpit.

Fully Portable
A brilliant 7” display, with built-in battery and GPS, only 0.8” thick.

Fully Customizable
Easily change the layout choosing what to see and where to display it: maps, taws, weather, vertical profile on map, nav data, HSI, EFIS

Full connectivity
With the special docking station EKP V is capable to connect all your devices at the same time.

User Friendly
New intuitive interface, Full QWERTY virtual Keyboard, New Joystick + smart wheel

Connectivity
Thanks to the special Docking Station, you can connect EKP V to several on-board devices at the same time (autopilot, XM WX, CAS, EIS, EFIS etc.) so that the large 7” LCD becomes multifunctional and capable to display different flight info.

Slim and light, yet very powerful
EKP V comes with built in u-blox 5 GPS receiver, built-in battery and speaker. The practical keyboard includes a configurable key, a new progressive jostick and a smart wheel selector. Ease of use ensured by the new graphic interface and the full QWERTY virtual keyboard.

Includes:Plastic Knee-pad bracket, Knee strap, Interface Cable, Power Cable, Power Supply Adapter, Quick Start Guide

AvMap EngineBOXOut of stock

AvMap EngineBOX

EMS, 80 mm

With an update rate of five times per second, Engibox measures and displays the engine parameters to warn you instantly if any measurement exceeds the engine limits. Data are recorded and stored in the internal memory (up to 160 hours).

Specifications

  • Dimensions: 95 x 95 x 88 mm (3.75″ x 3.75 x 3.46″)
  • Fitting standard 3-1/8″ panel hole
  • Weight: 250 g (8.8 Oz)
  • Display: 3.5” colour LCD, with anti reflective coat 320×240 pixels, 500 cm/m2
  • Micro SD slot
  • Real Time Clock
  • DB15 connector with antivibration lock system: Inputs: 4 x Thermocouples sensor 2 x PT100 sensor 1 x 4-20 mA pressure sensor 1 x RPM 1 x Serial connection
  • Note: Sensor probes are not included in the EngiBOX package
  • Manifold pressure sensor
  • Bluetooth Low Energy
  • Power Input range: 10-35 VDC
  • Current consumption @ 12VDC: 150 mA MAX
  • Operating Temperature range: -20°C/+70°C (-4°F/+158°F)
  • Wizard driven engine Initialization
  • Engine data displayed in two alternative views
  • Graph page for each engine parameter
  • Clock page including flight time, total lifetime, time since overhaul
  • Data registration on internal memory and data export to micro SD or EngiBOX mobile App

Compatible Engines

  • 2 Stroke Air cooled: Rotax 447 UL SCDI Rotax 503 UL DCDI
  • 2 Stroke Liquid cooled: Rotax 582 UL DCDI Rotax 618 UL DCDI
  • 4 Stroke Liquid cooled: Rotax 912 DCDI series Rotax 912S DCDI series Rotax 914 DCDI series
Becker AR6201-(022)Out of stock

Becker AR6201-(022)

COM Radio, 6W, 57 mm, 8.33kHz

The Becker AR6201 VHF Transceiver is smaller and lighter than its legendary forerunner AR 4201 due to implementation of state-of-art DSP (Digital Signal Processing) technology. It is mountable in the 2 1/4 inch standard instrument panel recess, equipped with a highly efficient AM-transmitter, offering easy switching between the 8,33 and the 25 kHz mode. A built-in-test facility increases flight safety. The dual monitor mode allows scanning of two different channels.