Out of stock
Available in 2-3 weeks
A bright red heavy nylon banner that can be fastened to anything that needs removing before flight. Comes with a grommet and wire ring that can be attached to everything from gear pins to gust locks and pitot covers. Heavy duty vinyl is tear resistant.
This pitot tube cover fits snugly over 3/4″ pitot systems, found on Cessna 150, 152, 172, 177, 182, 200 Series, Skymaster, and the Falcon jet. Critical to safe operations, the cover keeps dirt, contamination, and insects from entering the pitot tube. A “remove before flight” streamer hangs off the cover as a prominent preflight reminder to pilots. The cover uses a heavy-duty plastic material; the 2″ x 17″ banner is bright red with white screen-printing for maximum visibility.
This pitot tube cover fits snugly over 5/8″ pitot systems, found on Cessna 300 series, 400 series, Citation, and Conquest, Beech singles and twins, Piper Navaho and Cheyye, Mooneys, Mitsubishi, Lear jets, and Cirrus airplanes. Critical to safe operations, the cover keeps dirt, contamination, and insects from entering the pitot tube. A “remove before flight” streamer hangs off the cover as a prominent preflight reminder to pilots. The cover uses a heavy-duty plastic material; the 2″ x 17″ banner is bright red with white screen-printing for maximum visibility.
This pitot tube cover fits snugly over 5/8″ pitot systems, found on Cessna 300 series, 400 series, Citation, and Conquest, Beech singles and twins, Piper Navaho and Cheyye, Mooneys, Mitsubishi, Lear jets, and Cirrus airplanes. Critical to safe operations, the cover keeps dirt, contamination, and insects from entering the pitot tube. A “remove before flight” streamer hangs off the cover as a prominent preflight reminder to pilots. The cover uses a heavy-duty plastic material; the 2″ x 17″ banner is bright red with white screen-printing for maximum visibility.
Out of stock
Available in 2-3 weeks
This durable, weather-resistant orange and yellow reflective cover fits virtually any size pitot tube. It stands out in daylight or darkness under all weather conditions, so it can’t be missed. Large sewn-on Velcro tabs keep it securely in place under all conditions.
Out of stock
Forgetting to remove a faded, dull and worn-out pitot tube cover can jeopardize the safety of you and your passengers. The Plane Sights 5/8” inside diameter vented pitot plug with its unmistakably conspicuous Remove-before-Flight Streamer provides the perfect easy-on, easy-off solution, while protecting against insect and water contamination.
The blazing lime green colour of this foot-long, ANSI-compliant and weather-resistant reflective streamer stands out equally well in daylight or darkness under all weather conditions, so it can’t be missed. The plug is attached to the streamer’s rugged black oxide coated zinc grommet with a galvanized steel ring, and is vented to prevent pressurization damage to the pitot static system. This 5/8” Plug Fits Aero Commander, Twin Beach, Bonanza, Cessna 300/400/500, Conquest Series, Grumman, Lear, Mooney, Piper Cheyenne and Navajo aircraft.
5/8”/ 0.625” (15.875mm) ID x 1.85” (38.10mm) Useable Length
Rust-resistant, fade-resistant, wear-resistant and, like all Plane Sights products, guaranteed for two years!
Out of stock
Available in 2-3 weeks
This durable, weather-resistant orange and yellow reflective cover fits virtually any size pitot tube. It stands out in daylight or darkness under all weather conditions, so it can’t be missed.
Universal covers fit any length of tube from the smallest home built ¼” tubes to the largest 7/8” corporate jet probes. The versatile hook/loop Velcro strap with sewn-in rubberized trim allows the cover to be quickly and securely fastened to the pitot tube. The inside diameter of the cover is 7/8”. Guaranteed to work on any Cessna, Beechcraft, Cirrus, Diamond, Grumman or Mooney aircraft, as well as most Pipers and many light sport aircraft.
Reflective length 8″
Cover length 5.25″
Strap length 10.25″
Out of stock
Available in 2-3 weeks
Forgetting to remove a faded, dull and worn-out pitot tube cover can jeopardize the safety of you and your passengers. When cold weather prevents you from installing your pinch-and-insert style blade pitot cover, ice and snow can contaminate your pitot system. Some blade pitot covers also cause damage to paint when the sleve is being forced on and off.
The highly conspicuous and very durable Plane Sights Blade Pitot Cover is a perfect fit for any aircraft with a blade-type pitot tube or Piper gear extension mast. Properly installed, it’s guaranteed not to blow off, fade in the sun or wear out for at least two years. Fits Piper, Katana, some Rockwell, late Grumman, Lake 250, and all other aircraft with a blade-type pitot tube. Fits Piper, Katana, some Rockwell, late Grumman, Lake 250, and all other aircraft with a blade type of pitot tube. Guaranteed not to wear out or fade in the sun for two years.
Out of stock
Available in 2-3 weeks
Forgetting to remove a faded, dull and worn out pitot cover, or having the cover blow off can jeopardize the safety of you and your passengers. The Plane Sights extremely conspicuous and very durable Light Sport/Homebuilt Pitot Plug Kit provides a perfect fit for many homebuilt pitot tubes and light sport pitot tubes.
The kit includes several vented plugs so it even works with double-tube systems and is guaranteed not to pressurize your pitot static system. The blazing yellow color of the included foot-long, ANSI-compliant and weather-resistant reflective remove-before-flight streamer stands out equally well in daylight or darkness under all weather conditions, so it can’t be missed.
The kit comes complete with three different-sized pitot tube plugs, our unique streamer, and two rust-resistant coated triangle rings. Kit includes: Three (3) Plugs:
0.240”IDx 1.5”L (6.096mm ID x 38.10mm L)
0.302”ID x 2”L (7.671mm ID x 50.80mm L)
0.365”ID x2.0”L (9.271mm ID x 50.8mm L)
Two (2) triangle, zink coated rust resistant rings.
One (1) very bright foot long remove-before-flight streamer.
