Showing 271–279 of 1598 results

Aeroshell Fluid 12Out of stock
Sold Out

Aeroshell Fluid 12

Fluid, 1 US Gal

Available in 2-3 weeks

AeroShell Fluid 12 is used for general aircraft lubrication as well as for aircraft gyro instrument gimbal bearings, separately lubricated high speed turbines and compressors, aircraft air cycle equipment and electronic equipment.

Particularly suitable when an oil with a low evaporation rate is required at high and low temperatures. AeroShell Fluid 12 is a synthetic oil and it should not be used in contact with incompatible seal materials such as neoprene or natural rubber. Suitable seal material include Fluorocarbon (Viton). Fluid 12 may also affect certain paints and plastics and it is recommended that components are evaluated for compatibility if there is any question.

 

Quick View
Aeroshell Fluid 3

Aeroshell Fluid 3

Fluid, 1 US Gal 75.00

AeroShell Fluid 3 is a US and British Military approved general purpose mineral lubricating oil with good low temperature characteristics and a low freezing point. Fluid 3 is also inhibited against oxidation and corrosion.

AeroShell Fluid 3 is recommended for general lubrication of aircraft parts that require a light oil, eg. hinges, pivot joints, shaft joints, linkages pins and bearings, pulleys, cables, camera mechanisms, radio and radar gear and instruments. Fluid 3 is a relative low viscosity product with good resistance to evaporation which is normally applied by means of an oil can or brush.

 

Quick View
Aeroshell Fluid 31Out of stock
Sold Out

Aeroshell Fluid 31

Fluid, 1 US Gal

Available in 2-3 weeks

AeroShell Fluid 31 has a specially designed with a relatively high flash point, excellent low temperature properties and good oxidation and thermal stability. Fluid 31 is superclean filtered to ensure optimum performance in particulate monitored systems.

Aeroshell Fluid 31 is a synthetic hydrocarbon based aircraft hydraulic fluid with greatly improved fire resistance characteristics when compared with conventional petroleum products. In addition, Fluid 31 is formulated with high technology additives to provide oxidation and corrosion resistance, antiwear, and anti-foaming protection. Fluid 31 is recommended for use in aircraft, ordnance, and missile systems operating from 40°C to +205°C . This fluid should be considered for use in auto pilots, shock absorbers, brakes, flight control systems, hydraulic servo-controlled systems and other systems using synthetic elastomer seals.

Quick View
Aeroshell Fluid 41

Aeroshell Fluid 41

Hydraulic Fluid, 0,95l 15.01

AeroShell Fluid 41 is a mineral oil based “super clean” hydraulic fluid containing an oxidation inhibitor and a non-zinc anti-wear additive. AeroShell Fluid 41 is dyed red for identification and leak detection purposes.

AeroShell Fluid 41 contains additives which provide excellent low temperature fluidity as well as exceptional anti-wear, oxidation – corrosion inhibition and shear stability. In addition metal de-activators and foam inhibitors are included in this high viscosity index fluid to enhance performance in hydraulic applications. AeroShell Fluid 41 is capable of wide temperature range operation.

 

Quick View
Aeroshell Fluid 41Out of stock
Sold Out

Aeroshell Fluid 41

Hydraulic Fluid, 5l

Available in 2-3 weeks

AeroShell Fluid 41 is a mineral oil based “super clean” hydraulic fluid containing an oxidation inhibitor and a non-zinc anti-wear additive. AeroShell Fluid 41 is dyed red for identification and leak detection purposes.

AeroShell Fluid 41 contains additives which provide excellent low temperature fluidity as well as exceptional anti-wear, oxidation – corrosion inhibition and shear stability. In addition metal de-activators and foam inhibitors are included in this high viscosity index fluid to enhance performance in hydraulic applications. AeroShell Fluid 41 is capable of wide temperature range operation.

 

Quick View
Aeroshell Grease 14

Aeroshell Grease 14

Grease, 0,4kg 13.50

AeroShell Grease 14 is the leading helicopter multi-purpose grease and is approved by all helicopter manufacturers. Owing to its anti-fret properties, AeroShell Grease 14 is suitable for the lubrication of helicopter main and tail rotor bearings.

AeroShell Grease 14 is composed of a mineral oil thickened with a calcium soap and possesses outstanding anti-fret and anti-moisture corrosion properties making it oxidation and corrosion inhibited. The useful operating temperature range is 54°C to +93°C.

 

Quick View
Aeroshell Grease 14Out of stock
Sold Out

Aeroshell Grease 14

Grease, 3kg

Available in 2-3 weeks

AeroShell Grease 14 is the leading helicopter multi-purpose grease and is approved by all helicopter manufacturers. Owing to its anti-fret properties, AeroShell Grease 14 is suitable for the lubrication of helicopter main and tail rotor bearings.

AeroShell Grease 14 is composed of a mineral oil thickened with a calcium soap and possesses outstanding anti-fret and anti-moisture corrosion properties making it oxidation and corrosion inhibited. The useful operating temperature range is 54°C to +93°C.

 

Quick View
Aeroshell Grease 22

Aeroshell Grease 22

Grease, 0,4kg 15.66

AeroShell Grease 22 is recommended for use in severe operating conditions such as in high bearing loads, high speeds, wide operating temperature range and particularly where long grease retention and high resistance to water washout are required.

AeroShell Grease 22 is a versatile advanced general purpose grease composed of a synthetic hydrocarbon oil thickened with Microgel which gives outstanding performance characteristics. Appropriate additives are included to achieve the necessary oxidation and corrosion resistance, anti-wear properties and load carrying properties of the grease. The useful operating temperature range is -65°C to +204°C.

 

Quick View